VOLVO
ECM-2315 - Injector 5. Faulty signal
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo S60 (2001–2009)2001Nur Motor: D5244T
- Volvo S60 (2001–2009)2002–2003, 2006Nur Motor: D5244T, D5244T2
- Volvo S60 (2001–2009)2004–2005Nur Motor: D5244T, D5244T2, D5244T3
- Volvo S80 (1999–2006)2001Nur Motor: D5244T
- Volvo S80 (1999–2006)2002–2006Nur Motor: D5244T, D5244T2
- Volvo V70 (2000–2008)2001Nur Motor: D5244T
- Volvo V70 (2000–2008)2002–2003, 2006Nur Motor: D5244T, D5244T2
- Volvo V70 (2000–2008)2004–2005Nur Motor: D5244T, D5244T2, D5244T3
- Volvo V70 XC / XC70 (2001–2007)2003–2006Nur Motor: D5244T
- Volvo XC90 (2003–)2003–2006Nur Motor: D5244T
Was bedeutet der Fehlercode?
This code applies to injector 5. The engine control module uses its own power stage for each injector, and the fault may lie in the wiring to the injector, in the battery connections or in the control module. The code is set when the module detects the fault while the engine runs.
Mögliche Ursachen
- Defective charging system
- Open circuit in the signal or ground wire
- Signal wire short-circuited to ground
- Defective injector
- Defective engine control module (ECM)
- Loose or oxidised battery connections
Was Sie tun können
- 1Read and clear the code, then road test to see whether it returns
- 2Look at the battery connections and the earth point; they should be tight and not corroded
- 3Check that the connector to injector 5 is secure and free from oxidation
- 4Use a multimeter to check the wire to injector 5 for a break or a short to ground
- 5If the fault remains, have a workshop check the injector and the connections to the control module
Symptome, die Sie bemerken können2
- Engine fails to start
- Engine not firing on all cylinders
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.