Was bedeutet der Fehlercode ECM-2360?

Diagnose und Fehlercodedefinition für ECM-2360 (Volvo S80 (1999–2006), Volvo S80 (1999–2006), Volvo S80 (1999–2006)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-2360 - Injector 6. Signal missing. Intermittent fault

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

2 Modelle

S80 (1999–2006), XC90 (2003–)

Modelle nach Baujahr und Motor anzeigen (4)

Was bedeutet der Fehlercode?

The signal to injector 6 has dropped out briefly but is not present now. The fault is sporadic and may lie in the connector, the wire to the valve or the feed from the system relay.

Mögliche Ursachen

Open circuit in the signal wire
Open circuit in the power supply to the injector
Contact resistance in the connections

Was Sie tun können

1Check that the connector to injector 6 is secure and free from oxidation and play
2With the ignition on, press gently on the connector at valve 6 and see whether the signal briefly drops out
3Use a multimeter to check that the feed from the system relay to injector 6 is not interrupted
4If you have a diagnostic tool: note the fault status after a test drive and judge whether the fault is permanent or temporary
5If the fault remains, have a workshop decide whether the wiring or the valve needs attention

Symptome, die Sie bemerken können2

Engine not firing on all cylinders
Malfunction indicator lamp (MIL) lit

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.