VOLVO
ECM-23D0 - Injector cyl 4. Signal missing
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (23)
- Volvo C30 (2007–2013)2007Nur Motor: D4164T, D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Nur Motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo C30 (2007–2013)2011Nur Motor: D4164T
- Volvo C70 (2006–2013)2007Nur Motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2005, 2011Nur Motor: D4164T
- Volvo S40 (2004–2013)2006Nur Motor: D4164T, D5244T8
- Volvo S40 (2004–2013)2007Nur Motor: D4164T, D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Nur Motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Nur Motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Nur Motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2005, 2011Nur Motor: D4164T
- Volvo V50 (2004–2013)2006Nur Motor: D4164T, D5244T8
- Volvo V50 (2004–2013)2007Nur Motor: D4164T, D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Nur Motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Nur Motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Nur Motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Nur Motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Nur Motor: D5244T4
- Volvo XC90 (2003–)2006–2007Nur Motor: D5244T4
- Volvo XC90 (2003–)2008–2010Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Nur Motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The engine control module (ECM) monitors the signal to the injector for cylinder 4. When it is missing, the code is set. The cause may be a break in the signal wire, in the wiring to the valve or a faulty injector.
Mögliche Ursachen
- Signal wire is broken
- Break in the wiring to the injector
- Damaged injector
Was Sie tun können
- 1Read the code and clear it, then road test to see whether it comes back
- 2Trace the cable from injector 4 to the engine control module and check that it is intact
- 3Check the connector at the valve: it should be secure and clean
- 4If you have a diagnostic tool: activate injector 4 and see whether it clicks when activated
- 5If the fault remains, have a workshop check the valve
Symptome, die Sie bemerken können4
- Engine fails to start
- Message in the display
- Running feels weak and jerky
- Malfunction indicator lamp (MIL) lit
Was der Fehler beeinflussen kann1
- No fuel is sprayed into cylinder 4
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.