VOLVO
ECM-2456 - Pressure sensor, particle filter. Signal missing
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2007Nur Motor: D4204T
- Volvo C30 (2007–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo C70 (2006–2013)2008Nur Motor: D4204T
- Volvo C70 (2006–2013)2009–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo S40 (2004–2013)2005–2006Nur Motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2007Nur Motor: D4204T
- Volvo S40 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo V50 (2004–2013)2005–2006Nur Motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2007Nur Motor: D4204T
- Volvo V50 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
Was bedeutet der Fehlercode?
The ECM compares pressure readings from each side of the particle filter and checks that the sensor signal follows a calculated value. If the signal is missing altogether, the code is stored. The cause can be a poor connection, an open circuit in the wiring or a damaged pressure sensor.
Mögliche Ursachen
- Loose connections, contact resistance or oxidation at the terminals
- Open circuit in the supply cable to the sensor
- Open circuit in the ground lead
- Open circuit in the signal cable
- Damaged particle filter pressure sensor
Was Sie tun können
- 1Read and note the code, clear it and road test to see whether it returns
- 2Look at the terminals on the pressure sensor and make sure they are fully seated, not loose and clean
- 3Follow the supply, ground and signal leads from the sensor and look for breaks, chafing and pinch damage
- 4Use a multimeter to check that each lead is continuous all the way between the sensor and the control module, with no break
- 5If the leads are intact, have a workshop with diagnostic equipment check the pressure sensor
Symptome, die Sie bemerken können2
- The check engine light comes on
- Poor performance, the car lacks power
Was der Fehler beeinflussen kann1
- Engine output and speed may be limited
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.