Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-24C0
    VOLVO

    ECM-24C0 - Front heated oxygen sensor (HO2S), bank 1. Faulty signal

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    9 Modelle

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (23)
    • Volvo C30 (2007–2013)2007Nur Motor: B5254T3
    • Volvo C30 (2007–2013)2008–2013Nur Motor: B5254T7
    • Volvo C70 (2006–2013)2006–2007Nur Motor: B5254T3
    • Volvo C70 (2006–2013)2008–2013Nur Motor: B5254T7
    • Volvo S40 (2004–2013)2005–2007Nur Motor: B5254T3
    • Volvo S40 (2004–2013)2008Nur Motor: B5254T3, B5254T7
    • Volvo S40 (2004–2013)2009–2012Nur Motor: B5254T7
    • Volvo S60 (2001–2009)2005–2006Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
    • Volvo S60 (2001–2009)2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
    • Volvo S60 (2001–2009)2008–2009Nur Motor: B5204T5, B5244T5, B5254T2
    • Volvo S80 (1999–2006)2005–2006Nur Motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
    • Volvo V50 (2004–2013)2005–2007Nur Motor: B5254T3
    • Volvo V50 (2004–2013)2008–2012Nur Motor: B5254T7
    • Volvo V70 (2000–2008)2005Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
    • Volvo V70 (2000–2008)2006–2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
    • Volvo V70 (2000–2008)2008Nur Motor: B5254T2
    • Volvo V70 XC / XC70 (2001–2007)2005Alle Motoren außer: D5244T
    • Volvo V70 XC / XC70 (2001–2007)2006Nur Motor: B5244T4, B5254T2
    • Volvo V70 XC / XC70 (2001–2007)2007Nur Motor: B5254T2
    • Volvo XC90 (2003–)2005–2006Nur Motor: B5254T2, B6294T
    • Volvo XC90 (2003–)2007–2012Nur Motor: B5254T2
    • Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
    • Volvo XC90 (2003–)2015

    Was bedeutet der Fehlercode?

    The engine control module (ECM) checks the front oxygen sensor against the rear sensor and against what it expects from the engine. If the front sensor shows only air and no fuel/air mixture, or its signal conflicts with the rear sensor or with what is expected, the code is stored. The fault can lie in the front or rear sensor circuit.

    Mögliche Ursachen

    • Oxygen sensor fitted incorrectly in the exhaust system
    • Leakage in the exhaust system
    • Short circuit to supply voltage or ground in the signal cable or in the pump and calibration current cables
    • Open circuit in the signal cable (+)
    • Damaged front heated oxygen sensor

    Was Sie tun können

    1. 1Read and note the code, clear it and road test to see whether it returns
    2. 2Check that the oxygen sensor is correctly fitted in the exhaust system and that there are no leaks around it
    3. 3Look for air leaks in the exhaust system, such as cracks and leaking joints
    4. 4Follow the cables to the oxygen sensor and use a multimeter to check that they have no open circuit and are not short-circuited to supply voltage or ground
    5. 5If the cables are intact, have a workshop try a new oxygen sensor, since a damaged front or rear sensor can also cause the fault

    Symptome, die Sie bemerken können1

    • The malfunction indicator lamp (MIL) is lit

    Was der Fehler beeinflussen kann3

    • Oxygen sensor control is switched off
    • Long-term fuel trim is switched off
    • Catalytic converter diagnostics are switched off

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.