Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-2503
    VOLVO

    ECM-2503 - Fuel pressure. Pressure too low

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.

    Gilt für folgende Modelle:

    5 Modelle

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (10)
    • Volvo S60 (2001–2009)2001Nur Motor: D5244T
    • Volvo S60 (2001–2009)2002–2003, 2006Nur Motor: D5244T, D5244T2
    • Volvo S60 (2001–2009)2004–2005Nur Motor: D5244T, D5244T2, D5244T3
    • Volvo S80 (1999–2006)2001Nur Motor: D5244T
    • Volvo S80 (1999–2006)2002–2006Nur Motor: D5244T, D5244T2
    • Volvo V70 (2000–2008)2001Nur Motor: D5244T
    • Volvo V70 (2000–2008)2002–2003, 2006Nur Motor: D5244T, D5244T2
    • Volvo V70 (2000–2008)2004–2005Nur Motor: D5244T, D5244T2, D5244T3
    • Volvo V70 XC / XC70 (2001–2007)2003–2006Nur Motor: D5244T
    • Volvo XC90 (2003–)2003–2006Nur Motor: D5244T

    Was bedeutet der Fehlercode?

    The ECM reads fuel pressure in the rail. If the pressure is too low for the signal sent to the fuel pressure control valve, the code is set. Causes include air in the fuel, leaks or a blocked filter, or a damaged pump, sensor or valve.

    Mögliche Ursachen

    • The car has run with an empty tank
    • Air in the fuel
    • Blockage or leakage in the fuel supply
    • Blocked fuel filter
    • Damaged fuel pressure sensor or control valve
    • Faulty pressure safety valve or damaged fuel pump

    Was Sie tun können

    1. 1Read and note the code, clear it and road test to see whether it returns
    2. 2Think about whether the car has recently been run on an empty tank, since air can then enter the fuel system
    3. 3Look for fuel leaks in the fuel lines and check that nothing leaks after the fuel pump
    4. 4Make sure the fuel filter is not blocked and that the plugs of the pressure sensor and the pressure control valve are clean and firmly attached
    5. 5If you have a diagnostic tool: read the fuel pressure sensor value in live data at idle and see how it changes when you activate the fuel pressure control valve
    6. 6If the fault remains, have a workshop check the fuel pump, the pressure safety valve and the fuel pressure sensor

    Symptome, die Sie bemerken können3

    • The engine fails to start
    • The engine cuts out
    • The engine starts and dies immediately

    Was der Fehler beeinflussen kann1

    • Fuel supply is shut off for as long as the fault is active

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.