VOLVO
ECM-2508 - ECM / PCM Power Input Signal High
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (5)
- Volvo C30 (2007–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo C70 (2006–2013)2008Nur Motor: D4204T
- Volvo C70 (2006–2013)2009–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo S40 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo V50 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
Was bedeutet der Fehlercode?
The ECM checks the voltage on the system relay coil. The coil is fed through a fuse in the engine bay fuse box and grounded in the control module. If the voltage is too high, the code is stored.
Mögliche Ursachen
- Cable short-circuited to ground
- Damaged system relay
- Damaged engine control module (ECM)
Was Sie tun können
- 1Check that the fuses are intact and identify the fuse that feeds the system relay in the engine bay fuse box
- 2Look at the connections at the relay and the control module for oxidation and loose contacts
- 3Use a multimeter to check that the cable to the system relay is not short-circuited to ground
- 4If possible, check the relevant functions of the car with the switches and a test drive to see how the fault shows
- 5If the fuses, connectors and cables are intact, have a workshop with diagnostic equipment check the system relay and the control module
Symptome, die Sie bemerken können3
- The engine does not start
- The starter motor does not turn over
- No clicking sound when starting is attempted
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.