VOLVO
ECM-250B - Front heated oxygen sensor (HO2S), bank 2, heating. Signal missing
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS80 (1999–2006), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
Although the code is titled signal missing, it applies when the heater element of the front oxygen sensor on bank 2 has gone without control for a certain amount of time. The engine control module then stores the code.
Mögliche Ursachen
- Contact resistance and oxidation at the connections
- Damaged front heated oxygen sensor
Was Sie tun können
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check the connector to the front oxygen sensor on bank 2 for oxidation and loose connections. Do not use rust solvent spray or grease in it
- 3If possible, take readings from the cable side of the connector so it is not damaged and does not become a loose contact later
- 4If the connector is clean but the fault remains, have a workshop try a new front oxygen sensor
Symptome, die Sie bemerken können1
- The malfunction indicator lamp (MIL) is lit
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.