Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-2550
    VOLVO

    ECM-2550 - Fuel system. Too low pressure

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.

    Gilt für folgende Modelle:

    8 Modelle

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (20)
    • Volvo C30 (2007–2013)2007Nur Motor: D5244T8, D5244T9
    • Volvo C30 (2007–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
    • Volvo C70 (2006–2013)2007Nur Motor: D5244T8, D5244T9
    • Volvo C70 (2006–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
    • Volvo S40 (2004–2013)2006Nur Motor: D5244T8
    • Volvo S40 (2004–2013)2007Nur Motor: D5244T8, D5244T9
    • Volvo S40 (2004–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
    • Volvo S60 (2001–2009)2006Nur Motor: D5244T4, D5244T5, D5244T6, D5244T7
    • Volvo S60 (2001–2009)2007–2009Nur Motor: D5244T4, D5244T5, D5244T7
    • Volvo V50 (2004–2013)2006Nur Motor: D5244T8
    • Volvo V50 (2004–2013)2007Nur Motor: D5244T8, D5244T9
    • Volvo V50 (2004–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
    • Volvo V70 (2000–2008)2006Nur Motor: D5244T4, D5244T5, D5244T6, D5244T7
    • Volvo V70 (2000–2008)2007Nur Motor: D5244T4, D5244T5, D5244T7
    • Volvo V70 (2000–2008)2008Nur Motor: D5244T5, D5244T7
    • Volvo V70 XC / XC70 (2001–2007)2006–2007Nur Motor: D5244T4
    • Volvo XC90 (2003–)2006–2007Nur Motor: D5244T4
    • Volvo XC90 (2003–)2008–2010Nur Motor: D5244T4, D5244T5
    • Volvo XC90 (2003–)2011Nur Motor: D5244T18, D5244T4, D5244T5
    • Volvo XC90 (2003–)2012Alle Motoren außer: B5254T2, B6324S5

    Was bedeutet der Fehlercode?

    At certain operating modes, with a warm engine, the engine control module (ECM) regulates fuel pressure using the fuel flow control valve. If the ECM detects that the fuel pressure is too low in such a mode, the code is set. The fault may be caused by a leak, air in the fuel lines, a clogged fuel filter or a damaged component in the fuel system.

    Mögliche Ursachen

    • Leakage in the fuel system
    • Air in the fuel lines
    • Clogged fuel filter
    • Damaged tank pump
    • Damaged fuel pressure sensor
    • Damaged fuel flow control valve

    Was Sie tun können

    1. 1Read and act on any fault codes for the tank pump first, then clear the code and road test the car
    2. 2Look for fuel leaks at the connections and the injectors, and check that the fuel filter is not clogged
    3. 3Check that the fuel lines are not kinked and that the fuel pressure sensor connector is secure and free from oxidation
    4. 4With diagnostic equipment, follow the fuel pressure sensor's live data with the engine running and see whether the value drops under load
    5. 5Have a workshop check the fuel flow control valve and the tank pump if the fault returns after these checks

    Symptome, die Sie bemerken können2

    • Message in the display
    • The engine stalls

    Was der Fehler beeinflussen kann1

    • The engine control module uses a calculated value instead of the measured signal

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.