VOLVO
ECM-2565 - Position sensor turbocharger (TC). Signal too high
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo C30 (2007–2013)2007–2010Nur Motor: D4204T
- Volvo C70 (2006–2013)2008–2010Nur Motor: D4204T
- Volvo S40 (2004–2013)2004–2006Nur Motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Nur Motor: D4204T
- Volvo V50 (2004–2013)2004–2006Nur Motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Nur Motor: D4204T
Was bedeutet der Fehlercode?
The turbocharger vacuum actuator has a built-in position sensor, and the engine control module (ECM) compares its signal with the value it should have. If the signal is too high, the ECM treats it as a fault and the code is set.
Mögliche Ursachen
- Signal wire shorted to supply voltage
- Supply wire shorted to supply voltage
- Damaged position sensor
Was Sie tun können
- 1Clear the code and road test the car, then check whether it returns
- 2Check that the connector at the position sensor is secure and free from moisture and oxidation
- 3Use a multimeter to check that the wires to the position sensor are not in contact with live wiring
- 4With diagnostic equipment, read the sensor value with the ignition on and see whether it sits above its normal range
- 5Have a workshop check the position sensor and the wiring if the fault returns
Symptome, die Sie bemerken können1
- The malfunction indicator lamp (Check engine) lights up or behaves abnormally
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.