VOLVO
ECM-2584 - Additive dosing module (ADM). Faulty signal
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo C30 (2007–2013)2007–2010Nur Motor: D4204T
- Volvo C70 (2006–2013)2008–2010Nur Motor: D4204T
- Volvo S40 (2004–2013)2005–2006Nur Motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Nur Motor: D4204T
- Volvo V50 (2004–2013)2005–2006Nur Motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Nur Motor: D4204T
Was bedeutet der Fehlercode?
This is a follow-on code: the engine control module (ECM) has received a message on the CAN network about an emissions-related fault in the additive dosing module (ADM), or has found that communication between the modules is not working. The root fault lies in the ADM or the central electronic module (CEM) and should be fixed first. The code can then be erased.
Mögliche Ursachen
- A fault in the additive dosing module (ADM)
- A fault in the central electronic module (CEM)
- Faulty communication on the CAN network between the modules
Was Sie tun können
- 1Read the fault codes in the additive dosing module (ADM) first, then in the central electronic module (CEM)
- 2Fix the root faults according to their codes, then erase this code
- 3Check the condition of the battery and that its terminals are tight, since low voltage can cause communication faults
- 4Have a workshop check the CAN network communication if the ADM or CEM cannot be read
Symptome, die Sie bemerken können1
- Malfunction indicator lamp (MIL) on
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.