Was bedeutet der Fehlercode ECM-2585?

Diagnose und Fehlercodedefinition für ECM-2585 (Volvo C30 (2007–2013), Volvo C70 (2006–2013), Volvo S40 (2004–2013)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-2585 - Additive dosing module (ADM). Faulty signal

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

4 Modelle

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Modelle nach Baujahr und Motor anzeigen (5)

Was bedeutet der Fehlercode?

The ECM is informed over the CAN network that the additive dosing module (ADM) has registered a fault. The fault affects the dosing of additive into the main diesel fuel tank, and the ECM asks for an information lamp and a text message to be shown. This is a follow-on code: the root fault lies in the ADM and should be fixed first.

Mögliche Ursachen

A fault in the additive dosing module (ADM), which should be fault-traced there

Was Sie tun können

1Read the fault codes in the additive dosing module (ADM) and fix them first
2Clear this code once the ADM faults are fixed, then road test the car
3Check the condition of the battery and that its terminals are tight, since low voltage can cause communication faults
4Have a workshop check the ADM system if its fault codes cannot be read or fixed

Symptome, die Sie bemerken können3

Warning symbol and text message in the display
Service reminder shown in the display
Emissions status shows that readiness is not complete

Was der Fehler beeinflussen kann1

Dosing of additive into the diesel fuel is affected

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.