Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-25AB
    VOLVO

    ECM-25AB - Front heated oxygen sensor (HO2S), bank 2. Signal missing

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    2 Modelle

    S80 (1999–2006), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (2)
    • Volvo S80 (1999–2006)2005–2006Nur Motor: B6294S2, B6294T
    • Volvo XC90 (2003–)2005–2006Nur Motor: B6294T

    Was bedeutet der Fehlercode?

    The engine control module (ECM) has registered an open circuit in the ground wire to the oxygen sensor on bank 2. The signal is therefore missing, and the fault may lie in the ground wire or in the sensor itself.

    Mögliche Ursachen

    • Open circuit in the ground wire
    • Damaged front oxygen sensor on bank 2

    Was Sie tun können

    1. 1Read the code, clear it and road test the car to see whether it returns
    2. 2Check that the connector at the lambda sensor is fully engaged and clean, with no oxidation or contact resistance. Do not use rust solvent spray or grease
    3. 3Use a multimeter to check that the ground wire from the lambda sensor is unbroken all the way
    4. 4Look for chafed spots and breaks in the ground wire, especially where it is fixed to the body
    5. 5If the ground wire is intact the sensor may be damaged; have a workshop check it or replace it

    Symptome, die Sie bemerken können1

    • Malfunction indicator lamp (MIL) on

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.