Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-25B0
    VOLVO

    ECM-25B0 - Fuel system. Pressure too high

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.

    Gilt für folgende Modelle:

    8 Modelle

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (20)
    • Volvo C30 (2007–2013)2007Nur Motor: D5244T8, D5244T9
    • Volvo C30 (2007–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
    • Volvo C70 (2006–2013)2007Nur Motor: D5244T8, D5244T9
    • Volvo C70 (2006–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
    • Volvo S40 (2004–2013)2006Nur Motor: D5244T8
    • Volvo S40 (2004–2013)2007Nur Motor: D5244T8, D5244T9
    • Volvo S40 (2004–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
    • Volvo S60 (2001–2009)2006Nur Motor: D5244T4, D5244T5, D5244T6, D5244T7
    • Volvo S60 (2001–2009)2007–2009Nur Motor: D5244T4, D5244T5, D5244T7
    • Volvo V50 (2004–2013)2006Nur Motor: D5244T8
    • Volvo V50 (2004–2013)2007Nur Motor: D5244T8, D5244T9
    • Volvo V50 (2004–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
    • Volvo V70 (2000–2008)2006Nur Motor: D5244T4, D5244T5, D5244T6, D5244T7
    • Volvo V70 (2000–2008)2007Nur Motor: D5244T4, D5244T5, D5244T7
    • Volvo V70 (2000–2008)2008Nur Motor: D5244T5, D5244T7
    • Volvo V70 XC / XC70 (2001–2007)2006–2007Nur Motor: D5244T4
    • Volvo XC90 (2003–)2006–2007Nur Motor: D5244T4
    • Volvo XC90 (2003–)2008–2010Nur Motor: D5244T4, D5244T5
    • Volvo XC90 (2003–)2011Nur Motor: D5244T18, D5244T4, D5244T5
    • Volvo XC90 (2003–)2012Alle Motoren außer: B5254T2, B6324S5

    Was bedeutet der Fehlercode?

    In certain operating modes, including when the engine is cold, fuel pressure is controlled only by the fuel pressure control valve. If the pressure is too high in such a mode, the code is set. The fault may lie in the sensor or the valve, or the valve may not be receiving its supply voltage.

    Mögliche Ursachen

    • Damaged fuel pressure sensor
    • The fuel pressure control valve has no supply voltage
    • Damaged fuel pressure control valve

    Was Sie tun können

    1. 1Read the code, clear it and road test the car to see whether it returns
    2. 2Check the connectors at the fuel pressure sensor and the fuel pressure control valve for looseness, oxidation and contact resistance
    3. 3Use a multimeter to check that the wire to the fuel pressure control valve is not open circuit
    4. 4Think about whether anything has recently been done to the fuel system or its connectors, and check that everything is seated correctly
    5. 5With diagnostic equipment, read the fuel pressure sensor's live data when the engine is cold and again once it is warm
    6. 6Have a workshop check the supply voltage to the fuel pressure control valve if the fault remains

    Symptome, die Sie bemerken können2

    • Message in the information display
    • Reduced performance

    Was der Fehler beeinflussen kann1

    • The engine control module uses a calculated fuel pressure value instead of the sensor's reading

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.