Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-270A
    VOLVO

    ECM-270A - Adaptive lambda control, bank 2. Bottom limit

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    2 Modelle

    S80 (1999–2006), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (4)
    • Volvo S80 (1999–2006)1999Nur Motor: B6284T, B6304S3
    • Volvo S80 (1999–2006)2000–2001Nur Motor: B6284T, B6294S
    • Volvo S80 (1999–2006)2002–2004Nur Motor: B6294S2, B6294T
    • Volvo XC90 (2003–)2003–2004Nur Motor: B6294T

    Was bedeutet der Fehlercode?

    On bank 2 the ECM adjusts the fuel quantity from the oxygen sensor signal. When the long-term correction reaches its lower limit, the mixture on that bank is too rich, and the ECM cannot reduce the fuel any further.

    Mögliche Ursachen

    • High fuel pressure
    • Leaking injectors
    • Defective mass air flow (MAF) sensor
    • Contaminated engine oil
    • Too much oil in the engine

    Was Sie tun können

    1. 1Look at the oil level on the dipstick and whether the oil appears diluted or contaminated
    2. 2If you have diagnostic equipment, read the long-term correction for bank 2 at idle and see whether it is steady
    3. 3Have a workshop check the fuel pressure and the injectors if the fault remains
    4. 4Have a workshop check the mass air flow sensor if the fault remains after these checks

    Symptome, die Sie bemerken können1

    • No noticeable symptoms for the driver

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.