Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-271A
    VOLVO

    ECM-271A - Adaptive lambda control, bank 2 .Bottom limit

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    2 Modelle

    S80 (1999–2006), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (4)
    • Volvo S80 (1999–2006)1999Nur Motor: B6284T, B6304S3
    • Volvo S80 (1999–2006)2000–2001Nur Motor: B6284T, B6294S
    • Volvo S80 (1999–2006)2002–2004Nur Motor: B6294S2, B6294T
    • Volvo XC90 (2003–)2003–2004Nur Motor: B6294T

    Was bedeutet der Fehlercode?

    The long-term correction for bank 2 sets how much fuel the ECM adds based on the oxygen sensor. When it reaches its lower limit, the mixture is too rich and the ECM has reduced the fuel as far as it is allowed.

    Mögliche Ursachen

    • Fuel pressure is too high
    • Injectors that leak
    • Faulty mass air flow sensor
    • Contaminated engine oil
    • Oil level is too high

    Was Sie tun können

    1. 1Look at the oil level on the dipstick. It should sit between the marks and the oil should not feel diluted
    2. 2Have a workshop measure the fuel pressure and check the injectors, since high pressure and leakage give a rich mixture
    3. 3Have a workshop check the mass air flow sensor, since a defective sensor can give the wrong fuel quantity
    4. 4If you have diagnostic equipment, read the bank 2 long-term correction with the engine running and see whether the value is steady

    Symptome, die Sie bemerken können1

    • No noticeable symptoms for the driver

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.