Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-278A
    VOLVO

    ECM-278A - Adaptive lambda control, bank 2. Bottom limit

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    2 Modelle

    S80 (1999–2006), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (5)
    • Volvo S80 (1999–2006)1999Nur Motor: B6284T, B6304S3
    • Volvo S80 (1999–2006)2000–2001Nur Motor: B6284T, B6294S
    • Volvo S80 (1999–2006)2002, 2004Nur Motor: B6294S2, B6294T
    • Volvo S80 (1999–2006)2003Nur Motor: B5254T2, B6294S2, B6294T
    • Volvo XC90 (2003–)2003–2004Nur Motor: B6294T

    Was bedeutet der Fehlercode?

    The long-term correction on bank 2 has reached its lower limit. This means the engine control module has cut the fuel quantity as far as it can, because the mixture on bank 2 has been too rich.

    Mögliche Ursachen

    • Fuel pressure is too high
    • The injectors leak fuel
    • The mass air flow sensor is defective
    • The oil is contaminated
    • The oil level is set too high

    Was Sie tun können

    1. 1Check the oil level and whether the oil appears diluted or smells of fuel
    2. 2Have a workshop check the fuel pressure and the injectors if the fault remains
    3. 3Have a workshop check the mass air flow sensor if the fault remains after these checks
    4. 4With diagnostic equipment, read the bank 2 long-term correction at idle and see whether it is stable

    Symptome, die Sie bemerken können1

    • No noticeable symptoms for the driver

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.