VOLVO
ECM-280B - Fuel pressure sensor. Signal missing
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
9 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (23)
- Volvo C30 (2007–2013)2007Nur Motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Nur Motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Nur Motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2006–2007Nur Motor: B5254T3
- Volvo S40 (2004–2013)2008Nur Motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Nur Motor: B5254T7
- Volvo S60 (2001–2009)2005–2006Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Nur Motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Nur Motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V50 (2004–2013)2006–2007Nur Motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Nur Motor: B5254T7
- Volvo V70 (2000–2008)2005Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2007Nur Motor: B5204T5, B5244T5, B5254T4
- Volvo V70 XC / XC70 (2001–2007)2005Alle Motoren außer: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Nur Motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Nur Motor: B5254T2
- Volvo XC90 (2003–)2005–2006Nur Motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Nur Motor: B5254T2
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
- Volvo XC90 (2003–)2015
Was bedeutet der Fehlercode?
The engine control module (ECM) monitors the fuel pressure sensor signal. The fault is stored when the control module receives no signal at all from the sensor, which can be noticed while the engine is running. Without a signal the control module has no fuel pressure value, which can affect how the engine runs.
Mögliche Ursachen
- Signal cable short-circuited to ground
- Open circuit in the signal cable
- Damaged fuel pressure sensor
- Connector terminals with contact resistance, oxide or loose contact
Was Sie tun können
- 1Read and note the code. Clear it, warm the engine up and see whether it returns
- 2With a diagnostic tool, check that the fuel pressure signal shows in live data with the engine running
- 3Check the connector at the fuel pressure sensor: it should be secure, clean and free from oxidation
- 4With the car switched off, use a multimeter to check that the signal cable is not broken and is not short-circuited to ground
- 5Check that the ground lead to the sensor is not broken
- 6If no damage or connector fault is found, have a workshop replace the fuel pressure sensor and check that the fault clears
Symptome, die Sie bemerken können5
- Engine lacks power, especially when pulling away from standstill
- Engine may stall at any time
- Engine hesitates, surges or runs unevenly during acceleration and when slowing down
- Engine is hard to start, cranks slowly or does not start at all
- Check engine lamp (Malfunction Indicator Light) lit or behaving abnormally
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.