ECM-2900
VOLVO
ECM-2900 - Fuel pressure. Faulty signal
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
9 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (23)
- Volvo C30 (2007–2013)2007Nur Motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Nur Motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Nur Motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo S40 (2004–2013)2008Nur Motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Nur Motor: B5254T7
- Volvo S60 (2001–2009)2005–2006Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Nur Motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Nur Motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V50 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Nur Motor: B5254T7
- Volvo V70 (2000–2008)2005Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Nur Motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle Motoren außer: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Nur Motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Nur Motor: B5254T2
- Volvo XC90 (2003–)2005–2006Nur Motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Nur Motor: B5254T2
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
- Volvo XC90 (2003–)2015
Was bedeutet der Fehlercode?
Although the code is named faulty signal, it is set when the fuel pressure does not reach the target value requested by the engine control module, even though the pressure control has hit its highest or lowest limit. The fault can be noticed while the engine runs and while it idles.
Mögliche Ursachen
- Leak in the fuel lines
- Blocked fuel filter
- Contamination in the tank, such as grit or loose parts
- Damaged fuel pressure sensor
- Damaged fuel pump
- Damaged fuel pump control module
Was Sie tun können
- 1Check for stored codes for the fuel pressure sensor or the atmospheric pressure sensor, and deal with them first
- 2Make sure there is enough fuel in the tank, since a nearly empty tank can cause low fuel pressure
- 3Look for leaks in the fuel lines and check the filter for blockage
- 4Check the connectors at the fuel pressure sensor and at the pump control module for contact resistance and oxidation
- 5If you have a diagnostic tool: read the relative fuel pressure in live data with the engine warm and idling, and see whether it stays steady or drops too low
- 6If no fault is found, have a workshop try a new fuel pump, bearing in mind that a faulty pump control module or fuel pressure sensor can also cause the code
Symptome, die Sie bemerken können5
- Engine lacks power, especially when moving off from standstill
- Engine may stall at any time
- Engine hesitates, surges or runs unevenly under acceleration and when slowing down
- Engine starts poorly or does not start at all
- Check engine lamp (Malfunction Indicator Light) comes on or behaves abnormally
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.