Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-290D
    VOLVO

    ECM-290D - Fuel pressure. Signal too low

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    9 Modelle

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (23)
    • Volvo C30 (2007–2013)2007Nur Motor: B5254T3
    • Volvo C30 (2007–2013)2008–2013Nur Motor: B5254T7
    • Volvo C70 (2006–2013)2006–2007Nur Motor: B5254T3
    • Volvo C70 (2006–2013)2008–2013Nur Motor: B5254T7
    • Volvo S40 (2004–2013)2005–2007Nur Motor: B5254T3
    • Volvo S40 (2004–2013)2008Nur Motor: B5254T3, B5254T7
    • Volvo S40 (2004–2013)2009–2012Nur Motor: B5254T7
    • Volvo S60 (2001–2009)2005–2006Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
    • Volvo S60 (2001–2009)2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
    • Volvo S60 (2001–2009)2008–2009Nur Motor: B5204T5, B5244T5, B5254T2
    • Volvo S80 (1999–2006)2005–2006Nur Motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
    • Volvo V50 (2004–2013)2005–2007Nur Motor: B5254T3
    • Volvo V50 (2004–2013)2008–2012Nur Motor: B5254T7
    • Volvo V70 (2000–2008)2005Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
    • Volvo V70 (2000–2008)2006–2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
    • Volvo V70 (2000–2008)2008Nur Motor: B5254T2
    • Volvo V70 XC / XC70 (2001–2007)2005Alle Motoren außer: D5244T
    • Volvo V70 XC / XC70 (2001–2007)2006Nur Motor: B5244T4, B5254T2
    • Volvo V70 XC / XC70 (2001–2007)2007Nur Motor: B5254T2
    • Volvo XC90 (2003–)2005–2006Nur Motor: B5254T2, B6294T
    • Volvo XC90 (2003–)2007–2012Nur Motor: B5254T2
    • Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
    • Volvo XC90 (2003–)2015

    Was bedeutet der Fehlercode?

    The engine control module controls the fuel pressure through the fuel pump control module. The code is set when the measured fuel pressure stays too low compared with the requested pressure for a certain time. The fault can be noticed while the engine runs and while it idles.

    Mögliche Ursachen

    • Leakage at the fuel lines
    • Blocked fuel filter
    • Debris or loose particles inside the fuel tank
    • Damaged fuel pressure sensor
    • Damaged fuel pump
    • Damaged fuel pump control module

    Was Sie tun können

    1. 1Look up stored codes for the pressure sensors on the fuel and atmosphere side, and deal with those first
    2. 2Make sure the fuel level is not nearly empty, as there may then be too little fuel at the pump
    3. 3Look for leaks in the fuel lines and check that the fuel filter is not clogged
    4. 4Check the connectors at the fuel pressure sensor and at the pump control module for contact resistance and oxidation
    5. 5If you have a diagnostic tool: read the relative fuel pressure in live data with the engine warm and idling, and compare it with the target value the control module shows
    6. 6If no cause is found, have a workshop try a new fuel pump and check whether the fault clears

    Symptome, die Sie bemerken können5

    • Engine lacks power, especially when moving off from standstill
    • Engine may stall at any time
    • Engine hesitates or surges when holding a steady speed
    • Engine is hard to start or does not start at all
    • Check engine lamp comes on or behaves abnormally

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.