ECM-2A1B
VOLVO
ECM-2A1B - Fuel temperature sensor. Signal too low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (14)
- Volvo C30 (2007–2013)2007Nur Motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Nur Motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Nur Motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2006–2007Nur Motor: B5254T3
- Volvo S40 (2004–2013)2008Nur Motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Nur Motor: B5254T7
- Volvo S60 (2001–2009)2006Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S80 (1999–2006)2006Nur Motor: B5204T5, B5254T2
- Volvo V50 (2004–2013)2006–2007Nur Motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Nur Motor: B5254T7
- Volvo V70 (2000–2008)2006Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 XC / XC70 (2001–2007)2006Nur Motor: B5244T4, B5254T2
- Volvo XC90 (2003–)2006Nur Motor: B5254T2
Was bedeutet der Fehlercode?
The control module compares the fuel temperature during driving with the intake air and engine temperatures. If the fuel temperature is too far below the others, the fault is set. The cause may be poor contact or a damaged fuel temperature sensor.
Mögliche Ursachen
- Contact resistance or oxidation in the connections
- Damaged fuel temperature sensor
Was Sie tun können
- 1Check that the connector at the fuel pressure sensor is secure and free from contact resistance and oxidation
- 2If you have a diagnostic tool: read the fuel temperature at idle and compare it with engine temperature. Once the car has cooled, the two should be about equal
- 3With the car switched off, check the connector and wires to the sensor for play and oxidation
- 4If the connector is in order but the fault remains, have a workshop check the fuel temperature sensor with diagnostic equipment
Symptome, die Sie bemerken können1
- Malfunction indicator lamp (MIL) lit
Was der Fehler beeinflussen kann1
- A predefined value is used for the fuel temperature
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.