Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-2A20
    VOLVO

    ECM-2A20 - Particulate trap. Signal too low

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.

    Gilt für folgende Modelle:

    8 Modelle

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (20)
    • Volvo C30 (2007–2013)2007Nur Motor: D5244T8, D5244T9
    • Volvo C30 (2007–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
    • Volvo C70 (2006–2013)2007Nur Motor: D5244T8, D5244T9
    • Volvo C70 (2006–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
    • Volvo S40 (2004–2013)2006Nur Motor: D5244T8
    • Volvo S40 (2004–2013)2007Nur Motor: D5244T8, D5244T9
    • Volvo S40 (2004–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
    • Volvo S60 (2001–2009)2006Nur Motor: D5244T4, D5244T5, D5244T6, D5244T7
    • Volvo S60 (2001–2009)2007–2009Nur Motor: D5244T4, D5244T5, D5244T7
    • Volvo V50 (2004–2013)2006Nur Motor: D5244T8
    • Volvo V50 (2004–2013)2007Nur Motor: D5244T8, D5244T9
    • Volvo V50 (2004–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
    • Volvo V70 (2000–2008)2006Nur Motor: D5244T4, D5244T5, D5244T6, D5244T7
    • Volvo V70 (2000–2008)2007Nur Motor: D5244T4, D5244T5, D5244T7
    • Volvo V70 (2000–2008)2008Nur Motor: D5244T5, D5244T7
    • Volvo V70 XC / XC70 (2001–2007)2006–2007Nur Motor: D5244T4
    • Volvo XC90 (2003–)2006–2007Nur Motor: D5244T4
    • Volvo XC90 (2003–)2008–2010Nur Motor: D5244T4, D5244T5
    • Volvo XC90 (2003–)2011Nur Motor: D5244T18, D5244T4, D5244T5
    • Volvo XC90 (2003–)2012Nur Motor: D5244T18, D5244T5

    Was bedeutet der Fehlercode?

    The engine control module (ECM) compares the pressure before and after the particulate trap. The fault code is set when the signal from the particulate trap pressure sensor is too low, which can be caused by the signal wire being short-circuited to ground or by the particulate trap being missing.

    Mögliche Ursachen

    • Signal wire short-circuited to ground
    • Particulate trap missing
    • Damaged differential pressure sensor

    Was Sie tun können

    1. 1Make sure the pressure sensor hoses are not swapped round
    2. 2Check that the particulate trap is present and fitted correctly
    3. 3If you have a diagnostic tool: read the pressure sensor value in live data with the engine running and see whether it changes when the engine is revved
    4. 4Use a multimeter to check that the signal wire to the pressure sensor has no contact with ground (the body)
    5. 5If the fault remains, have a workshop check the pressure sensor and the particulate trap

    Symptome, die Sie bemerken können2

    • Poor performance
    • The malfunction indicator light (MIL) comes on

    Was der Fehler beeinflussen kann1

    • Engine output and engine speed are limited

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.