VOLVO
ECM-2C5C - Injector cyl 6. Signal too high
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS80 (1999–2006), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The signal to the injector for cylinder 6 is too high. It may come from a short to supply voltage in the signal wire or from a damaged injector.
Mögliche Ursachen
- Signal wire short-circuited to supply voltage
- Damaged injector
Was Sie tun können
- 1Read and note the code, clear it and road test
- 2Look for chafing or pinching on the cylinder 6 wire, as it may have touched a live source
- 3With ignition on, use a multimeter to check that the cylinder 6 signal wire is not shorted to supply voltage
- 4If you have a diagnostic tool: with ignition on, compare the cylinder 6 signal with the other cylinders in live data
- 5If the wire is undamaged but the fault remains, have a workshop test the cylinder 6 injector
Symptome, die Sie bemerken können2
- The malfunction indicator lamp (MIL) is on
- The engine is not running on all cylinders
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.