Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-2D00
    VOLVO

    ECM-2D00 - Fuel pressure control valve. Faulty signal

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.

    Gilt für folgende Modelle:

    4 Modelle

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Modelle nach Baujahr und Motor anzeigen (10)
    • Volvo C30 (2007–2013)2007Nur Motor: D5244T8, D5244T9
    • Volvo C30 (2007–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
    • Volvo C70 (2006–2013)2007Nur Motor: D5244T8, D5244T9
    • Volvo C70 (2006–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
    • Volvo S40 (2004–2013)2006Nur Motor: D5244T8
    • Volvo S40 (2004–2013)2007Nur Motor: D5244T8, D5244T9
    • Volvo S40 (2004–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
    • Volvo V50 (2004–2013)2006Nur Motor: D5244T8
    • Volvo V50 (2004–2013)2007Nur Motor: D5244T8, D5244T9
    • Volvo V50 (2004–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9

    Was bedeutet der Fehlercode?

    In some operating modes, such as when the engine is cold, fuel pressure is controlled only by the fuel pressure control valve. The fault code is set when the module detects that the control signal to that valve is faulty.

    Mögliche Ursachen

    • Contact resistance or oxidation in the connectors
    • Open circuit in the signal wire
    • Damaged fuel pressure control valve
    • Signal wire short-circuited to ground

    Was Sie tun können

    1. 1Read and note the code, clear it, then try starting the engine again
    2. 2Check the connector at the fuel pressure control valve for contact resistance, oxidation and play
    3. 3Use a multimeter to check that the valve wire has no open circuit or short to ground (the body)
    4. 4If you have a diagnostic tool: activate the fuel pressure control valve with ignition on and listen for it working
    5. 5If the fault remains, have a workshop check the valve and its supply

    Symptome, die Sie bemerken können2

    • The engine does not start, but the starter motor cranks it
    • The engine stalls while driving

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.