VOLVO
ECM-301A - Camshaft position (CMP) sensor, exhaust. Faulty signal
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008)
Modelle nach Baujahr und Motor anzeigen (13)
- Volvo C30 (2007–2013)2007–2011Nur Motor: B5244S4
- Volvo C70 (2006–2013)2006Alle Motoren außer: B5254T3
- Volvo C70 (2006–2013)2007–2010Nur Motor: B5244S4, B5244S5
- Volvo C70 (2006–2013)2011Nur Motor: B5244S4
- Volvo S40 (2004–2013)2004Nur Motor: B5244S4, B5244S5
- Volvo S40 (2004–2013)2005–2010Nur Motor: B5244S4, B5244S5, B5244S7
- Volvo S60 (2001–2009)2003–2006Nur Motor: B5244S, B5244S6
- Volvo S60 (2001–2009)2007–2009Nur Motor: B5244S
- Volvo S80 (1999–2006)2003–2006Nur Motor: B5244S
- Volvo V50 (2004–2013)2004Nur Motor: B5244S4, B5244S5
- Volvo V50 (2004–2013)2005–2010Nur Motor: B5244S4, B5244S5, B5244S7
- Volvo V70 (2000–2008)2003–2006Nur Motor: B5244S, B5244S6
- Volvo V70 (2000–2008)2007–2008Nur Motor: B5244S
Was bedeutet der Fehlercode?
The control module checks the signal from the exhaust camshaft position sensor and counts the camshaft flanks during the crankshaft revolutions. If fewer flanks than expected are found, the code is stored. The fault is checked once the engine speed has risen above a set level. The cause may be a connection fault, incorrectly adjusted camshafts, or a sensor that is incorrectly fitted or damaged.
Mögliche Ursachen
- Contact resistance in the connections
- Incorrectly adjusted camshafts
- Signal wire short-circuited to supply voltage
- Temporary open circuit in the wiring or a splice
- Incorrectly installed camshaft position sensor
- Damaged exhaust camshaft position sensor
Was Sie tun können
- 1If another fault code for camshaft position is stored, investigate that one first
- 2Check the camshaft position sensor connector for contact resistance and oxidation
- 3Check that the camshaft position sensor is firmly fitted in the correct position and that the rotor on the camshaft is not damaged
- 4Read the fault status with the engine running: Fault found means the fault is still present, No fault detected means it was intermittent
- 5If other checks show nothing: have a workshop check the camshaft adjustment
Symptome, die Sie bemerken können2
- The engine is difficult to start
- The engine misfires
Was der Fehler beeinflussen kann1
- The control module uses the engine speed sensor signal if it is working
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.