VOLVO
ECM-3060 - Knock control. Internal fault
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2007Nur Motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Nur Motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Nur Motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo S40 (2004–2013)2008Nur Motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Nur Motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Nur Motor: B5254T7
Was bedeutet der Fehlercode?
The control module filters the signal from the knock sensor before it is used for knock control. If it finds an internal fault in that filter, the code is stored. The fault therefore lies in the control module, not in the sensor or the wiring. The engine warning lamp may light, and ignition timing is pulled back to protect the engine.
Mögliche Ursachen
- Damaged engine control module (ECM)
Was Sie tun können
- 1Clear the fault code and drive the car briefly to see whether it returns
- 2Check that the battery is in good condition and that the ground connections are secure, since interference at start-up can cause temporary faults
- 3Have a workshop replace the control module if the fault returns or remains
Symptome, die Sie bemerken können2
- Poor performance
- Engine warning lamp lit
Was der Fehler beeinflussen kann1
- Ignition advance is pulled back to protect the engine
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.