VOLVO
ECM-342B - Camshaft position (CMP) sensor. Signal missing
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2007Nur Motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Nur Motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Nur Motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo S40 (2004–2013)2008Nur Motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Nur Motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Nur Motor: B5254T7
Was bedeutet der Fehlercode?
The control module has received faulty or no signal from the camshaft sensors for both intake and exhaust. The code is always set together with another code for a camshaft sensor signal fault, so both codes should be read.
Mögliche Ursachen
- No signal from the camshaft sensors
- Faulty circuit for the camshaft sensors
Was Sie tun können
- 1Read the codes for both camshaft sensors, since this code always comes with another signal fault code
- 2Start with the other camshaft sensor code, because this code comes with it
- 3Check that the connectors to both camshaft sensors are secure and free from oxidation
- 4Have a workshop check the camshaft sensor circuits with diagnostic equipment
Symptome, die Sie bemerken können2
- Uneven idle
- Poor performance
Was der Fehler beeinflussen kann3
- Camshaft control is switched off
- Diagnostic for camshaft control is switched off
- Boost pressure drops to its basic level
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.