ECM-3503
VOLVO
ECM-3503 - Misfire, at least one cylinder
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
9 ModelleC70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008), V70 XC (1998–2000), V70 XC / XC70 (2001–2007)
Modelle nach Baujahr und Motor anzeigen (16)
- Volvo C70 Cabriolet (1998–2005)1999, 2001–2002
- Volvo C70 Cabriolet (1998–2005)2000Alle Motoren außer: B5244S
- Volvo C70 Coupé (1998–2002)1999Alle Motoren außer: B5254S DENSO
- Volvo C70 Coupé (1998–2002)2000Alle Motoren außer: B5244S
- Volvo C70 Coupé (1998–2002)2001–2002
- Volvo S60 (2001–2009)2001Alle Motoren außer: B5244S, B5244S2, D5244T
- Volvo S70 (1997–2000)1999Nur Motor: B5204T3, B5204T4, B5234T3, B5234T7, B5254T
- Volvo S70 (1997–2000)2000Nur Motor: B5204T3, B5204T4, B5234T3, B5234T7, B5244T
- Volvo S80 (1999–2006)1999–2000Alle Motoren außer: B5244S, B5244S2, D5252T MSA 15.8
- Volvo S80 (1999–2006)2001Nur Motor: B5204T5, B5234T7, B5244T3, B6284T, B6294S
- Volvo V70 (1997–2000)1999Nur Motor: B5204T3, B5204T4, B5234T3, B5234T7, B5234T8, B5254T
- Volvo V70 (1997–2000)2000Alle Motoren außer: B5244S, B5244S2, B5244SG, B5244SG2, D5252T MSA 15.8
- Volvo V70 (2000–2008)2000Alle Motoren außer: D5252T MSA 15.8
- Volvo V70 (2000–2008)2001Nur Motor: B5204T5, B5234T3, B5234T7, B5244T3
- Volvo V70 XC (1998–2000)1999–2000
- Volvo V70 XC / XC70 (2001–2007)2001
Was bedeutet der Fehlercode?
The engine misfires to a degree that risks damaging the catalytic converter, and the control module has registered it. This code is always set together with a code showing which cylinder misfires, so both should be read.
Mögliche Ursachen
- Temporary fuel stoppage
- Repeated cold starts where the engine does not reach operating temperature between starts
- Contaminated or incorrect fuel
- Air leakage
- Blocked or leaking injectors
- Incorrect fuel pressure
Was Sie tun können
- 1Read both fault codes, since this code always comes with a code for the misfiring cylinder
- 2Check that there is fuel in the tank and that the engine oil level is correct
- 3Check that the intake does not leak air and that the crankcase ventilation is not blocked
- 4If you have a diagnostic tool: check in live data which cylinder has the most misfires
- 5Have a workshop measure fuel pressure and compression and check the injectors with diagnostic equipment
Symptome, die Sie bemerken können5
- The engine misfires
- The engine is difficult to start
- Deterioration in performance
- Uneven idle
- Some cylinders are not firing properly
Was der Fehler beeinflussen kann3
- Catalytic converter diagnosis is switched off
- Leakage diagnosis is switched off
- Rear oxygen sensor control is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.