VOLVO
ECM-353D - Ignition coil cylinder 4, signal. Signal too low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (13)
- Volvo S60 (2001–2009)2005–2006Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Nur Motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Nur Motor: B5204T5, B5244T4, B5254T2
- Volvo V70 (2000–2008)2005Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Nur Motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle Motoren außer: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Nur Motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Nur Motor: B5254T2
- Volvo XC90 (2003–)2005–2012Nur Motor: B5254T2
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
- Volvo XC90 (2003–)2015
Was bedeutet der Fehlercode?
The engine control module has detected that the signal to the ignition coil for cylinder 4 is too low. The coil then does not receive the control it needs to ignite the mixture in that cylinder, so the engine can misfire there. The fault concerns the signal wire and the coil, and the connector at the coil is a good first thing to check.
Mögliche Ursachen
- The signal wire to the ignition coil is short-circuited to ground
- Damaged ignition coil
Was Sie tun können
- 1Check that the connector at ignition coil 4 is fully seated and free from corrosion
- 2Follow the signal wire from the coil and look for chafing, pinch damage or places where it may touch the body
- 3Use a multimeter to check that the signal wire to the coil has no contact with ground (the body), with the connector unplugged at the coil
- 4Read and note the code, clear it and road test to see whether it returns
- 5If the wire is intact: have a workshop with diagnostic equipment check the ignition coil
Symptome, die Sie bemerken können2
- The malfunction indicator lamp is on
- Cylinder 4 is not firing properly, so the engine runs roughly
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.