ECM-354D
VOLVO
ECM-354D - Ignition coil cylinder 5, signal. Signal too low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (13)
- Volvo S60 (2001–2009)2005–2006Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Nur Motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Nur Motor: B5204T5, B5244T4, B5254T2
- Volvo V70 (2000–2008)2005Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Nur Motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle Motoren außer: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Nur Motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Nur Motor: B5254T2
- Volvo XC90 (2003–)2005–2012Nur Motor: B5254T2
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
- Volvo XC90 (2003–)2015
Was bedeutet der Fehlercode?
The engine control module has detected that the signal to the ignition coil for cylinder 5 is too low. The coil then does not get the control it needs, so cylinder 5 can misfire. The cause may be a signal wire that is short-circuited to ground, or a damaged ignition coil.
Mögliche Ursachen
- Signal wire short-circuited to ground
- Damaged ignition coil
Was Sie tun können
- 1Check that the connector at ignition coil 5 is fully seated and free from corrosion
- 2Follow the signal wire from the coil and look for chafing, pinch damage or places where it may have shorted to the body
- 3Use a multimeter to check that the signal wire to the coil has no connection to ground (the body), with the connector unplugged at the coil
- 4Read and clear the code, then road test to see whether it returns
- 5Do not replace the ignition coil until the wire has been checked, then have a workshop confirm that the coil is the fault
Symptome, die Sie bemerken können2
- Malfunction indicator lamp is lit
- The engine does not fire on all cylinders
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.