VOLVO
ECM-362D - Ignition coil cylinder 3. Signal too low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2007Nur Motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Nur Motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Nur Motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo S40 (2004–2013)2008Nur Motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Nur Motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Nur Motor: B5254T7
Was bedeutet der Fehlercode?
The engine control module reads a signal from the ignition coil for cylinder 3 that is too low. The fault can lie in the wire, which may be shorted to ground, or in the coil. As long as the signal is too low, cylinder 3 may not be fired correctly and the engine can misfire.
Mögliche Ursachen
- A short to ground in the wire
- Damaged ignition coil
Was Sie tun können
- 1Check that the connector to ignition coil 3 is clean and fully seated
- 2Look at the wire from the coil for chafing or pinch damage, especially where it bends
- 3Use a multimeter to check that the wire has no connection to ground (the body), with the connector unplugged at the coil
- 4Read the code, note that it refers to ignition coil 3, clear it and road test
- 5Have a workshop confirm the condition of the coil with diagnostic equipment once the wire has been checked
Symptome, die Sie bemerken können2
- Malfunction indicator lamp is lit
- Cylinder 3 does not fire properly
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.