Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-4010
    VOLVO

    ECM-4010 - EVAP canister shut-off valve. Faulty signal

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.

    Gilt für folgende Modelle:

    7 Modelle

    C70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008)

    Modelle nach Baujahr und Motor anzeigen (10)
    • Volvo C70 Cabriolet (1998–2005)2000Nur Motor: B5244S
    • Volvo C70 Coupé (1998–2002)1999Nur Motor: B5254S DENSO
    • Volvo C70 Coupé (1998–2002)2000Nur Motor: B5244S
    • Volvo S60 (2001–2009)2001–2002Nur Motor: B5244S, B5244S2
    • Volvo S70 (1997–2000)1999Nur Motor: B5254S DENSO
    • Volvo S70 (1997–2000)2000Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
    • Volvo S80 (1999–2006)1999–2002Nur Motor: B5244S, B5244S2
    • Volvo V70 (1997–2000)1999Nur Motor: B5254S DENSO
    • Volvo V70 (1997–2000)2000Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
    • Volvo V70 (2000–2008)2001–2002Nur Motor: B5244S, B5244S2

    Was bedeutet der Fehlercode?

    The signal cable to the canister shut-off valve is short-circuited to ground or supply voltage, or the circuit is open. The engine control module then cannot control the valve, and the EVAP valve is not activated. The fault can come from poor contact in the connector, a shorted cable or a defective valve.

    Mögliche Ursachen

    • Signal cable short-circuited to supply voltage
    • Signal cable short-circuited to ground
    • Open circuit in the signal cable
    • Defective canister shut-off valve

    Was Sie tun können

    1. 1Check the connector to the canister shut-off valve for contact resistance and oxidation, and make sure it is fully seated
    2. 2If you have a diagnostic tool: activate the valve with the ignition on and listen for a click
    3. 3If the valve works after the connector has been checked, poor contact may have been the cause: check the connector and the wire carefully
    4. 4Follow the wire from the valve and look for chafing, kinks or a short to the body
    5. 5Have a workshop replace the canister shut-off valve if the fault remains after these checks

    Symptome, die Sie bemerken können1

    • No noticeable symptoms for the driver

    Was der Fehler beeinflussen kann1

    • The EVAP valve is not activated

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.