Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-4338
    VOLVO

    ECM-4338 - Fuel tank filler cap missing

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.

    Gilt für folgende Modelle:

    10 Modelle

    C70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008), V70 XC (1998–2000), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (26)
    • Volvo C70 Cabriolet (1998–2005)1999, 2001–2005
    • Volvo C70 Cabriolet (1998–2005)2000Alle Motoren außer: B5244S
    • Volvo C70 Coupé (1998–2002)1999Alle Motoren außer: B5254S DENSO
    • Volvo C70 Coupé (1998–2002)2000Alle Motoren außer: B5244S
    • Volvo C70 Coupé (1998–2002)2001–2002
    • Volvo S60 (2001–2009)2001Alle Motoren außer: B5244S, B5244S2, D5244T
    • Volvo S60 (2001–2009)2002Nur Motor: B5204T5, B5234T3, B5234T7, B5244T3
    • Volvo S60 (2001–2009)2003Nur Motor: B5204T5, B5234T3, B5234T7, B5244T3, B5254T2
    • Volvo S60 (2001–2009)2004Nur Motor: B5204T5, B5234T3, B5234T7, B5254T2, B5254T4
    • Volvo S70 (1997–2000)1999Nur Motor: B5204T3, B5204T4, B5234T3, B5234T7, B5254T
    • Volvo S70 (1997–2000)2000Nur Motor: B5204T3, B5204T4, B5234T3, B5234T7, B5244T
    • Volvo S80 (1999–2006)1999–2000Alle Motoren außer: B5244S, B5244S2, D5252T MSA 15.8
    • Volvo S80 (1999–2006)2001Nur Motor: B5204T5, B5234T7, B5244T3, B6284T, B6294S
    • Volvo S80 (1999–2006)2002Nur Motor: B5204T5, B5234T7, B5244T3, B6294S2, B6294T
    • Volvo S80 (1999–2006)2003Nur Motor: B5204T5, B5234T7, B5244T3, B5254T2, B6294S2, B6294T
    • Volvo S80 (1999–2006)2004Nur Motor: B5204T5, B5234T7, B5254T2, B6294S2, B6294T
    • Volvo V70 (1997–2000)1999Nur Motor: B5204T3, B5204T4, B5234T3, B5234T7, B5234T8, B5254T
    • Volvo V70 (1997–2000)2000Alle Motoren außer: B5244S, B5244S2, B5244SG, B5244SG2, D5252T MSA 15.8
    • Volvo V70 (2000–2008)2000Alle Motoren außer: D5252T MSA 15.8
    • Volvo V70 (2000–2008)2001–2002Nur Motor: B5204T5, B5234T3, B5234T7, B5244T3
    • Volvo V70 (2000–2008)2003Nur Motor: B5204T5, B5234T3, B5234T7, B5244T3, B5254T2
    • Volvo V70 (2000–2008)2004Nur Motor: B5204T5, B5234T3, B5234T7, B5254T2, B5254T4
    • Volvo V70 XC (1998–2000)1999–2000
    • Volvo V70 XC / XC70 (2001–2007)2001–2002
    • Volvo V70 XC / XC70 (2001–2007)2003–2004Alle Motoren außer: D5244T
    • Volvo XC90 (2003–)2003–2004Alle Motoren außer: D5244T

    Was bedeutet der Fehlercode?

    If the fuel tank pressure does not fall quickly enough when the system is tested, the fault code is set. It is set in the first operating cycle where the fault is found, and the driver is then warned with a text message that the cap may be loose or missing. ECM-4308 for a major leak in the fuel tank system is set at the same time.

    Mögliche Ursachen

    • Leak in the tank, filler pipe, filler cap, canister, canister shut-off valve or the lines between them
    • Blocked EVAP valve, canister, tank pressure sensor or lines between these components
    • Sticking EVAP valve
    • Faulty fuel tank pressure sensor
    • Filler cap missing or not properly tightened
    • Fuel gauge not working, which is registered in the rear electronic module (REM)

    Was Sie tun können

    1. 1Check that the filler cap is on and fully tightened, and that its seal is intact
    2. 2There is no separate fault-tracing for this code, so follow up the major leak that is set at the same time, ECM-4308
    3. 3Look for leaks in the hoses and connections at the canister, the canister shut-off valve and the tank
    4. 4Have you got a diagnostic tool: read the tank pressure in live data with the ignition on and check that it falls when the canister shut-off valve is activated
    5. 5Have a workshop with diagnostic equipment run a quick test of the fuel tank system if the leak cannot be found by these checks

    Symptome, die Sie bemerken können1

    • Malfunction indicator lamp (MIL) is on

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.