Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-4411
    VOLVO

    ECM-4411 - Fuel cut-off valve. Signal faulty. Intermittent fault

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    2 Modelle

    S40 (1996–2004), V40 (1996–2004)

    Modelle nach Baujahr und Motor anzeigen (2)
    • Volvo S40 (1996–2004)1999–2000Nur Motor: D4192T2
    • Volvo V40 (1996–2004)1999–2000Nur Motor: D4192T2

    Was bedeutet der Fehlercode?

    The engine control module has found a fault on the signal line to the fuel cut-off valve, and the fault is intermittent, meaning it comes and goes. It can be caused by a short circuit to positive or ground, an open circuit in the wire or a defective injection pump. While the fault is present, EGR control is switched off.

    Mögliche Ursachen

    • Signal wire short-circuited to supply voltage
    • Signal wire short-circuited to ground
    • Open circuit in the signal wire
    • Defective injection pump

    Was Sie tun können

    1. 1Check the connector of the fuel cut-off valve for contact resistance and oxidation
    2. 2Look for chafed or pinched wiring to the fuel cut-off valve, especially where the signal wire may have touched positive or ground
    3. 3Use a multimeter to check that the signal wire is not open-circuited and has no contact with positive or ground
    4. 4Have a workshop check the injection pump if the wiring is intact
    5. 5Since the fault is intermittent it may come back, so clear the fault code after the repair and test drive the car

    Symptome, die Sie bemerken können3

    • Malfunction indicator lamp (MIL) is on
    • The engine does not start
    • The engine does not stop

    Was der Fehler beeinflussen kann1

    • EGR control is switched off

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.