VOLVO
ECM-4413 - Position sensor. Signal faulty. Intermittent fault
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS40 (1996–2004), V40 (1996–2004)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The engine control module has found a fault in the signal wire from the position sensor, or the injection position was wrong when the engine was started or switched off. The fault is intermittent, meaning it comes and goes. The engine may then be hard to start, and an earlier fault in the injection pump may have left the code stored.
Mögliche Ursachen
- Signal wire short-circuited to supply voltage
- Signal wire short-circuited to ground
- Defective injection pump
Was Sie tun können
- 1Check the connectors to the injection pump and the position sensor for oxidation and loose fit
- 2Look for chafed or pinched wiring from the position sensor
- 3Use a multimeter to check that the signal wire from the position sensor has no contact with positive or ground
- 4Have a workshop check the injection pump if the wiring is intact
- 5The engine may have had an earlier fault in the injection pump that is now gone; clear the fault code and test drive the car to see if it returns
Symptome, die Sie bemerken können2
- Malfunction indicator lamp (MIL) is on
- The engine does not start
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.