VOLVO
ECM-442D - Fuel level sensor. Signal too low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2007Nur Motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Nur Motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Nur Motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2006–2007Nur Motor: B5254T3
- Volvo S40 (2004–2013)2008Nur Motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Nur Motor: B5254T7
- Volvo V50 (2004–2013)2006–2007Nur Motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Nur Motor: B5254T7
Was bedeutet der Fehlercode?
The central electronic module (CEM) registers that the signal from the fuel level sensor is too low, and sets a fault code both in itself and in the engine control module. Troubleshooting therefore starts in the CEM, and until it is complete this code cannot be erased.
Mögliche Ursachen
- Electrical fault in the fuel level sensor giving too low a signal
- Fault in the central electronic module (CEM), which should be troubleshot first
Was Sie tun können
- 1Start by reading the fault codes in the CEM and remedy them
- 2The code in the engine control module cannot be erased until the CEM fault is remedied, so erase it last
- 3If you have a diagnostic tool: compare the fuel level in live data with the gauge reading when the tank is full
- 4Have a workshop check the fuel level sensor and its electrical connection if the fault returns after CEM troubleshooting
Symptome, die Sie bemerken können1
- Fuel gauge shows an incorrect value, often too low
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.