VOLVO
ECM-4430 - Fuel level sensor. Faulty signal
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2007Nur Motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Nur Motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Nur Motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2006–2007Nur Motor: B5254T3
- Volvo S40 (2004–2013)2008Nur Motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Nur Motor: B5254T7
- Volvo V50 (2004–2013)2006–2007Nur Motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Nur Motor: B5254T7
Was bedeutet der Fehlercode?
The engine control module (ECM) tracks fuel consumption and compares it with how the tank level changes over time. If the level does not drop as much as the consumption suggests, the code is set. It is a follow-on fault from the CEM, which shows the fault first, so troubleshooting starts there.
Mögliche Ursachen
- Fault in the central electronic module (CEM), which should be troubleshot first
- Fault in the fuel level sensor, which the CEM reads and reports onward
Was Sie tun können
- 1Remedy the fault codes in the central electronic module (CEM) first, since this code follows from them
- 2Erase the codes in the CEM once the faults are remedied, then erase this code
- 3If you have a diagnostic tool: compare the tank level value in live data with how much fuel you actually add
- 4If the fault remains after CEM troubleshooting, a workshop needs to examine the fuel level sensor
Symptome, die Sie bemerken können1
- Fuel gauge shows the wrong level or a value that is too low
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.