VOLVO
ECM-4480 - EGR position sensor. Faulty signal
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (20)
- Volvo C30 (2007–2013)2007Nur Motor: D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
- Volvo C70 (2006–2013)2007Nur Motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2006Nur Motor: D5244T8
- Volvo S40 (2004–2013)2007Nur Motor: D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Nur Motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Nur Motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2006Nur Motor: D5244T8
- Volvo V50 (2004–2013)2007Nur Motor: D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Nur Motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Nur Motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Nur Motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Nur Motor: D5244T4
- Volvo XC90 (2003–)2006–2007Nur Motor: D5244T4
- Volvo XC90 (2003–)2008–2010Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Nur Motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle Motoren außer: B5254T2, B6324S5
Was bedeutet der Fehlercode?
The engine control module monitors the signal from the position sensor on the EGR valve. The code is set when the signal is judged to be incorrect, and EGR control then stops. The fault can lie in the connectors, the signal wire, the supply to the sensor or the sensor itself.
Mögliche Ursachen
- Poor contact, contact resistance or oxidation in the connections, or a break in them
- Break in the signal wire from the position sensor
- No voltage supply to the position sensor
- Damaged position sensor
- Position sensor has stopped working
- Electromagnetic interference can sometimes have triggered the code
Was Sie tun können
- 1Note the fault code, erase it and test-drive to see whether it returns
- 2Check that the EGR valve can be closed and opened fully without sticking, since a sticking valve can give the same code
- 3If you have a diagnostic tool: activate the EGR valve several times and see whether it moves more freely afterwards
- 4Check the position sensor connector for contact resistance and oxidation, and look for a break in the signal wire
- 5If the fault remains, have a workshop with diagnostic equipment measure the supply and signal to the position sensor
Symptome, die Sie bemerken können1
- Message shown in the text display
Was der Fehler beeinflussen kann1
- No EGR control takes place
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.