VOLVO
ECM-513B - Malfunction indicator lamp (MIL), transmission control module (TCM). Signal missing
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo S60 (2001–2009)2005–2006Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S80 (1999–2006)2005–2006Nur Motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V70 (2000–2008)2005Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 XC / XC70 (2001–2007)2005Alle Motoren außer: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Nur Motor: B5244T4, B5254T2
- Volvo XC90 (2003–)2005–2006Nur Motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Nur Motor: B5254T2
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
- Volvo XC90 (2003–)2015
Was bedeutet der Fehlercode?
The engine control module (ECM) has registered that the transmission control module (TCM) has asked for frozen values to be saved, and the code is set then. The signal that concerns the warning lamp is therefore missing in the engine control module.
Mögliche Ursachen
- Fault in the transmission control module (TCM), which should be troubleshot first
Was Sie tun können
- 1Troubleshoot the transmission control module (TCM) first: read off its fault codes and remedy them
- 2The code in the engine control module cannot be erased until the TCM fault is erased, so erase it last
- 3If you have a diagnostic tool: check which codes are held in the transmission control module to see where the problem is
- 4Have a workshop examine the transmission control module if its fault codes cannot be remedied
Symptome, die Sie bemerken können1
- Symptoms depend on which fault is held in the gearbox module
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.