VOLVO
ECM-552C - Oil temperature sensor. Signal too high
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Was bedeutet der Fehlercode?
Although the code is named signal too high, it applies to a mismatch between the oil and coolant temperature readings. The engine control module (ECM) compares them and sets the code when the gap becomes too large. The reading is also used to calculate the service interval, so the fault can affect the service indication. The code is set after the car has stood for a long time and then been driven.
Mögliche Ursachen
- Signal wire shorted to voltage
- Damaged oil temperature sensor
Was Sie tun können
- 1Clear the code and drive the car after it has stood for a long period, to see whether it returns
- 2Make sure the connectors at the oil temperature sensor and the engine temperature sensor are fully seated and free from oxidation or raised contact resistance
- 3With a multimeter, check that the oil temperature sensor's signal wire has no contact with ground or voltage
- 4With a diagnostic tool, compare oil and coolant temperatures in live data, cold and warm, and see whether the gap is unreasonable
- 5If the fault remains, have a workshop check the wiring and replace the oil temperature sensor if needed
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.