VOLVO
ECM-5600 - Oil level sensor. Signal missing
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS60 (2001–2009), V70 (2000–2008)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The engine control module (ECM) checks the oil level sensor. Although the code is named signal missing, it is also set when the reading is too high or too low. The causes are in the wiring, in the connectors, or in the sensor itself.
Mögliche Ursachen
- Signal wire shorted to voltage
- Faulty oil level sensor
- Signal wire shorted to ground
- Play, raised contact resistance or oxidation in the connectors
- Break in the signal wire
- Break in the supply voltage
Was Sie tun können
- 1Check that the connector at the oil level sensor is fully seated and free from oxidation and contact resistance
- 2With a multimeter, check that the signal wire has no contact with voltage or ground and is not broken
- 3If you have a diagnostic tool, read the oil level value in live data with the engine running and see whether it is too high, too low or missing
- 4If ECM-5630 is also stored, fix the fault for this code first
- 5If the fault remains, have a workshop try a new oil level sensor
Symptome, die Sie bemerken können2
- The oil pressure lamp lights up or behaves abnormally
- Warning lamps and warning signals light up or behave abnormally
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.