Was bedeutet der Fehlercode ECM-5610?

Diagnose und Fehlercodedefinition für ECM-5610 (Volvo C70 (2006–2013), Volvo C70 (2006–2013), Volvo S40 (2004–2013)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-5610 - Oil quality, level and temp sensor. Signal too low

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

3 Modelle

C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Modelle nach Baujahr und Motor anzeigen (8)

Was bedeutet der Fehlercode?

The ECM keeps track of engine oil condition through one combined sensor for temperature, level and quality. The code is set when the oil quality reading is faulty, and a message is shown in the text display. Although the code is named signal too low, the causes can lie in either a high or a low reading, such as wiring, connectors, or contaminated oil.

Mögliche Ursachen

Contaminated engine oil
Poor quality engine oil
Signal wire shorted to voltage
Signal wire shorted to ground
Raised contact resistance or oxidation in the connector terminals
Damaged oil level sensor

Was Sie tun können

1Check that the relevant fuses are intact
2Check that the oil is the correct grade and not contaminated, and change it if needed
3Check the connector at the sensor and look for oxidation or loose contacts
4With a multimeter, check that the signal wire has no contact with voltage or ground
5If you have a diagnostic tool, read the oil quality and oil level values in live data with the ignition on and see whether either is unreasonable
6If the fault remains, have a workshop check the sensor and replace it if needed

Symptome, die Sie bemerken können1

A message is shown in the text display

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.