VOLVO
ECM-639A - Injector class not programmed. Configuration fault
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo S60 (2001–2009)2001Nur Motor: D5244T
- Volvo S60 (2001–2009)2002–2003, 2006Nur Motor: D5244T, D5244T2
- Volvo S60 (2001–2009)2004–2005Nur Motor: D5244T, D5244T2, D5244T3
- Volvo S80 (1999–2006)2001Nur Motor: D5244T
- Volvo S80 (1999–2006)2002–2006Nur Motor: D5244T, D5244T2
- Volvo V70 (2000–2008)2001Nur Motor: D5244T
- Volvo V70 (2000–2008)2002–2003, 2006Nur Motor: D5244T, D5244T2
- Volvo V70 (2000–2008)2004–2005Nur Motor: D5244T, D5244T2, D5244T3
- Volvo V70 XC / XC70 (2001–2007)2003–2006Nur Motor: D5244T
- Volvo XC90 (2003–)2003–2006Nur Motor: D5244T
Was bedeutet der Fehlercode?
The engine control module (ECM) lacks the optimizing parameters for the injectors, which must match the injector class. It is a configuration fault: the parameters need to be entered into the control module.
Mögliche Ursachen
- Optimizing parameters are not programmed
Was Sie tun können
- 1Have a workshop program in the optimizing parameters that match the injector class
- 2If the injectors or the engine control module have been replaced, have the workshop check afterwards that the programming matches
- 3Clear the code after programming and see whether it returns
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.