Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-643A
    VOLVO

    ECM-643A - Camshaft position, exhaust. Signal too low

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.

    Gilt für folgende Modelle:

    5 Modelle

    C70 Cabriolet (1998–2005), S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007)

    Modelle nach Baujahr und Motor anzeigen (9)
    • Volvo C70 Cabriolet (1998–2005)2003–2005
    • Volvo S60 (2001–2009)2002–2003Nur Motor: B5204T5, B5234T3, B5234T7, B5244T3
    • Volvo S60 (2001–2009)2004Nur Motor: B5204T5, B5234T3, B5234T7
    • Volvo S80 (1999–2006)2002–2003Nur Motor: B5204T5, B5234T7, B5244T3
    • Volvo S80 (1999–2006)2004Nur Motor: B5204T5, B5234T7
    • Volvo V70 (2000–2008)2002–2003Nur Motor: B5204T5, B5234T3, B5234T7, B5244T3
    • Volvo V70 (2000–2008)2004Nur Motor: B5204T5, B5234T3, B5234T7
    • Volvo V70 XC / XC70 (2001–2007)2002
    • Volvo V70 XC / XC70 (2001–2007)2003–2004Nur Motor: B5234T7

    Was bedeutet der Fehlercode?

    The engine control module has registered that the signal for the exhaust camshaft position is too low. The fault may be caused by poor oil quality, incorrectly adjusted camshafts, a timing belt that has jumped over the teeth, or a mechanical fault in the VVT unit.

    Mögliche Ursachen

    • Poor oil quality
    • Incorrectly adjusted camshafts
    • The timing belt has jumped over the teeth
    • Defective reset valve
    • Mechanical fault in the VVT unit

    Was Sie tun können

    1. 1Start the engine and let it warm up. Read the camshaft adaptation at idle with a diagnostic tool. A value outside the normal range points to a permanent fault
    2. 2Check the engine oil level and quality, and look for contamination in the oil
    3. 3If the camshafts are incorrectly adjusted, a workshop needs to adjust them to the crankshaft
    4. 4Have a workshop check that the timing belt has not jumped over the teeth

    Symptome, die Sie bemerken können1

    • The malfunction indicator lamp (MIL) lights

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.