Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-6500
    VOLVO

    ECM-6500 - Engine pads. Faulty signal

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.

    Gilt für folgende Modelle:

    4 Modelle

    S60 (2001–2009), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (10)
    • Volvo S60 (2001–2009)2006Nur Motor: D5244T4, D5244T5, D5244T6, D5244T7
    • Volvo S60 (2001–2009)2007–2009Nur Motor: D5244T4, D5244T5, D5244T7
    • Volvo V70 (2000–2008)2006Nur Motor: D5244T4, D5244T5, D5244T6, D5244T7
    • Volvo V70 (2000–2008)2007Nur Motor: D5244T4, D5244T5, D5244T7
    • Volvo V70 (2000–2008)2008Nur Motor: D5244T5, D5244T7
    • Volvo V70 XC / XC70 (2001–2007)2006–2007Nur Motor: D5244T4
    • Volvo XC90 (2003–)2006–2007Nur Motor: D5244T4
    • Volvo XC90 (2003–)2008–2010Nur Motor: D5244T4, D5244T5
    • Volvo XC90 (2003–)2011Nur Motor: D5244T18, D5244T4, D5244T5
    • Volvo XC90 (2003–)2012Alle Motoren außer: B5254T2, B6324S5

    Was bedeutet der Fehlercode?

    The engine control module checks the signal to the solenoid valve that controls the engine mounts and records the fault code if the signal is incorrect. The valve controls how the engine mounts work, so a fault in the signal means the control is not right.

    Mögliche Ursachen

    • Signal wire shorted to supply voltage
    • Damaged solenoid valve
    • Signal wire shorted to ground
    • Faulty power supply
    • Signal missing because of an open circuit in the signal wire

    Was Sie tun können

    1. 1Check that the connector to the solenoid valve is secure and clean, and that the cable has no chafing
    2. 2If you have a diagnostic tool: activate the engine mount solenoid valve and listen for a click from the valve
    3. 3Use a multimeter to check that the signal wire is not shorted to ground or supply voltage
    4. 4Repair any damaged cable or connector, and replace the solenoid valve if it does not click when activated

    Symptome, die Sie bemerken können1

    • A message appears in the information display

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.