VOLVO
ECM-6700 - Engine pads. Signal too low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo S60 (2001–2009)2001Nur Motor: D5244T
- Volvo S60 (2001–2009)2002–2003, 2006Nur Motor: D5244T, D5244T2
- Volvo S60 (2001–2009)2004–2005Nur Motor: D5244T, D5244T2, D5244T3
- Volvo S80 (1999–2006)2001Nur Motor: D5244T
- Volvo S80 (1999–2006)2002–2006Nur Motor: D5244T, D5244T2
- Volvo V70 (2000–2008)2001Nur Motor: D5244T
- Volvo V70 (2000–2008)2002–2003, 2006Nur Motor: D5244T, D5244T2
- Volvo V70 (2000–2008)2004–2005Nur Motor: D5244T, D5244T2, D5244T3
- Volvo V70 XC / XC70 (2001–2007)2003–2006Nur Motor: D5244T
- Volvo XC90 (2003–)2003–2006Nur Motor: D5244T
Was bedeutet der Fehlercode?
The fault code applies to the control signal to the vacuum valve for the engine mounts. It is stored when the signal is too high or too low. When the signal is too low, the wire may be shorted to ground or have an open circuit.
Mögliche Ursachen
- Signal wire shorted to ground
- Open circuit in the signal wire
- Defective vacuum valve
- Faulty power supply
Was Sie tun können
- 1Check the connector at the vacuum valve for contact resistance and oxidation, and clean it if needed
- 2Use a multimeter to check that the wire to the vacuum valve has no open circuit and is not shorted to ground
- 3Look for chafing or pinched spots on the wire
- 4Replace the vacuum valve if the connector and wire are in order but the fault remains
Symptome, die Sie bemerken können2
- Vibrations at idle
- The engine mounts bottom out when accelerating or when the throttle is released
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.