VOLVO
ECM-670D - Camshaft position, intake. Low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (14)
- Volvo S60 (2001–2009)2005–2006Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Nur Motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Nur Motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V70 (2000–2008)2005Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Nur Motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle Motoren außer: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Nur Motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Nur Motor: B5254T2
- Volvo XC90 (2003–)2005–2006Nur Motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Nur Motor: B5254T2
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
- Volvo XC90 (2003–)2015
Was bedeutet der Fehlercode?
The engine control module has registered that the intake camshaft sits too far back, behind the crankshaft, during adaptation. The fault code is then stored and camshaft control is switched off.
Mögliche Ursachen
- Poor engine oil quality
- Camshafts incorrectly adjusted
- The timing belt has jumped over the teeth
- Damaged air conditioning compressor
- Faulty camshaft reset valve
- Mechanical fault in the VVT unit
Was Sie tun können
- 1Oil must be at the right level and grade and free of contamination, so check it first
- 2The diagnostic tool shows the intake camshaft adaptation at idle with a warm engine. Check that the value lies within the acceptable range
- 3Have a workshop adjust the camshaft settings against the crankshaft using the prescribed method
- 4Have a workshop check that the timing belt has not jumped over the teeth
- 5If the fault remains after the adjustment, the reset valve may need cleaning or replacing
Symptome, die Sie bemerken können1
- The malfunction indicator lamp is lit
Was der Fehler beeinflussen kann1
- Camshaft control is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.