VOLVO
ECM-671D - Camshaft position, exhaust. Low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (14)
- Volvo S60 (2001–2009)2005–2006Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Nur Motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Nur Motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V70 (2000–2008)2005Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Nur Motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle Motoren außer: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Nur Motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Nur Motor: B5254T2
- Volvo XC90 (2003–)2005–2006Nur Motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Nur Motor: B5254T2
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
- Volvo XC90 (2003–)2015
Was bedeutet der Fehlercode?
During adaptation the engine control module has found that the exhaust camshaft position lies behind the crankshaft. The fault code is stored and control is switched off.
Mögliche Ursachen
- Poor oil quality
- Camshafts incorrectly adjusted
- The timing belt has jumped over the teeth
- Damaged reset valve for the exhaust camshaft
- Mechanical fault in the VVT unit
Was Sie tun können
- 1Check that the oil level is correct and that the oil is clean and of the right grade
- 2Have a workshop check the engine oil pressure, since it affects the VVT control
- 3Have a workshop adjust the camshaft basic setting and read the adaptation again at warm idle
- 4Have a workshop check that the timing belt is seated correctly and that the reset valve has not stuck
- 5If the fault remains after all the work, the VVT unit may be defective, which a workshop will judge
Symptome, die Sie bemerken können1
- The malfunction indicator lamp is lit
Was der Fehler beeinflussen kann1
- Camshaft control for the exhaust is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.