VOLVO
ECM-6898 - Bypass valve, charge air cooler (CAC) (SAE J1930). Faulty signal
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (3)
Was bedeutet der Fehlercode?
The engine control module (ECM) compares the feedback from the position sensor on the charge air cooler bypass valve with what is reasonable while control of the valve is active. If the signal is judged not reasonable, the code is set with the ignition on. The cause may be a bypass valve that binds or has stuck, or a damaged valve.
Mögliche Ursachen
- The bypass valve binds or has stuck
- Damaged bypass valve
Was Sie tun können
- 1Look for visible damage and dirt at the bypass valve, as these can make it bind or stick
- 2Check the plug at the ECM and at the bypass valve for loose contact, contact resistance and oxidation
- 3Read the code, clear it and road test the car; if the code returns, have a workshop replace the bypass valve
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.