ECM-7510
VOLVO
ECM-7510 - Engine speed (RPM) signal. Faulty signal
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (23)
- Volvo C30 (2007–2013)2007Nur Motor: D4164T, D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Nur Motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo C30 (2007–2013)2011Nur Motor: D4164T
- Volvo C70 (2006–2013)2007Nur Motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2005, 2011Nur Motor: D4164T
- Volvo S40 (2004–2013)2006Nur Motor: D4164T, D5244T8
- Volvo S40 (2004–2013)2007Nur Motor: D4164T, D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Nur Motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Nur Motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Nur Motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2005, 2011Nur Motor: D4164T
- Volvo V50 (2004–2013)2006Nur Motor: D4164T, D5244T8
- Volvo V50 (2004–2013)2007Nur Motor: D4164T, D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Nur Motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Nur Motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Nur Motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Nur Motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Nur Motor: D5244T4
- Volvo XC90 (2003–)2006–2007Nur Motor: D5244T4
- Volvo XC90 (2003–)2008–2010Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Nur Motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle Motoren außer: B5254T2, B6324S5
Was bedeutet der Fehlercode?
The engine control module (ECM) monitors the engine speed signal and has registered that it is faulty. The fault may be due to poor connections or open wiring to the engine speed (RPM) sensor or the camshaft sensor, but also to a damaged sensor. The fault applies to the C30, C70 (06-), S40 (04-), S60 (-09), V50, V70, V70 XC and XC90.
Mögliche Ursachen
- Contact resistance in the connectors or an open circuit in the wiring to the engine speed (RPM) sensor
- Contact resistance in the connectors or an open circuit in the wiring to the camshaft sensor
- Damaged engine speed (RPM) sensor
- Damaged camshaft sensor
- Internal fault in the engine control module
Was Sie tun können
- 1Read the code, note it, clear it and road test the car to see whether it comes back
- 2Check that the connectors to the engine speed sensor and the camshaft sensor are secure and free from corrosion
- 3Check the wiring between the sensors and the engine control module for breaks and chafing
- 4If you have a diagnostic tool: compare the engine speed value in live data with the camshaft sensor value and check that they follow each other
- 5If the fault remains, have a workshop with diagnostic equipment check the sensors and the engine control module
Symptome, die Sie bemerken können2
- Reduced engine performance
- The engine hesitates, surges or runs unevenly at a steady speed
Was der Fehler beeinflussen kann1
- Engine output may be limited
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.